Printing via bypass tray
If needed, one can print onto special papers and transparencies. Special papers could be used for certain print jobs ex final thesis etc.
In order to accomplish this, certain settings have to be set before printing.
Paper type by the weight of the paper
Paper types that are supported by Toshiba multifunction printers.
Paper type | Weight g/m3 |
---|---|
Plain | 64-105 |
Thick1 | 106-163 |
Thick2 | 164-209 |
Thick3 | 210-256 |
Thick4 | 257-300 |
Depending on the program that is being used, either select Printer Properties or Preferences.
Select Bypass Tray from the Paper Source drop-down menu.
Open Bypass tray from the device and set papers or transparencies onto to it.
Align paper controllers so that they are touching papers or transparencies. Note! Only use transparencies that are suited for printing with laser printers!
Select the paper type that used from the Paper Type drop-down menu. Or transparencies if those are used.
Finally press ok and print out the job normally.
Note! A3 transparencies >> When device is waiting for paper from the bypass tray, select Normal. This is because the device does not know that A3 transparencies exist.
Double sided
If needed, one can print double-sided jobs from the bypass tray also.
Select Printer properties and switch to Finishing
Select print layout from the 2-sided Printing section. Normal book layout is selected in the picture below.
- Created by Kalevi Lehto, last modified by Unknown User (samiu) on 4.8.2016
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 14 Next »
- No labels