Table of Contents
If needed, one With Toshiba you can print on onto special papers (i.e. thick paper etc.) if you define the printing settings right. The bypass tray will then be used and paper type must be selected.
...
and transparencies. Special papers could be used for certain print jobs, for example final thesis etc.
In order to accomplish this, certain settings have to be set before printing.
Paper type by the weight of the paper
Paper types that are supported by Canon multifunction printers.
Paper type | Weight g/ |
|---|
m3 | Standard | Definition | |
|---|---|---|---|
| Plain 1 | 60-90 | ||
Plain 2 | 64-105 | e.g. Normal A4 and A3 sheet | |
| Plain 3 | 91-105 |
| Heavy 1 | 91-180 | ||
Heavy 2 | 106- |
220 |
Thick2
164-209
Thick3
210-256
Thick4
257-300
Transparencies
Use only transparencies designed for use in laser printers/copiers.!!
Using the bypass tray and paper type settings
If you print on any other materials than ordinary A4/A3 paper you must select the print settings when creating a print job.
...
| 2-sided | e.g. certificate paper and paper cover | ||
| Heavy 3 | 129-256 | Paper casette | |
| Heavy 4 | 164-300 | Multipurpose level |
Using bypass tray
1. Depending on the program that is being used, either select Printer Properties or Preferences.
2. Select Paper Source tab. From "Select by" choose Paper Source and from "Paper Source" select Multi-purpose Tray. Press OK.
3. Print the document.
4. Open Bypass tray from the device and put papers or transparencies in. (Printing side downwards)
5. Align paper controllers so that they are touching papers or transparencies. Note! Only use transparencies that are suited for printing with laser printers!
6. Choose paper size and type from multifunction device .(Näkymä riippuu laitteesta.) Choose paper size and from Change button and choose paper thickness depending on paper type. Select Transparency as Paper Type when printing on transparencies.
7. Finally press OK and print out the job normally.
Note! A3 transparencies >> When device is waiting for paper from the bypass tray, select Normal. This is because the device does not know that A3 transparencies exist.
Double sided
In Metropolia default printing setting is 2-sided printing. Check that your settings are in order.
1. Depending on the program that is being used, either select Printer Properties or Preferences.
2. In Basic Settings tab you will find 1-sided/2-sided/Booklet Printing: where you can choose 1-sided, 2-sided, Booklet Printing. Press OK.
That is all in principle. Click OK and in the application, click Print and you print job is sent to the printer.
Double-sided
You can print double-sided when using the bypass tray. Once again, go to Printer Properties and Finishing tabs.
Select 2-sided Printing and the desired direction underneath it. In the picture below book binding is selected.
Erikoispaperit & kalvot ja ohisyötön käyttö