With Toshiba you can print on special papers (i.e. thick paper etc.) if you define the printing settings right. The bypass tray will then be used and paper type must be selected.
Weights
Paper type | Weight g/m3 |
|---|---|
Plain | 64-105 |
Thick1 | 106-163 |
Thick2 | 164-209 |
Thick3 | 210-256 |
Thick4 | 257-300 |
Transparencies
Use only transparencies designed for use in laser printers/copiers.!!
Using the bypass tray and paper type settings
If you print on any other materials than ordinary A4/A3 paper you must select the print settings when creating a print job.
In other words, depending on the application, a window like the one below will open under Printer Properties or Preferencies:
In Paper Source, select Bypas Tray and in Paper Type, select the desired material - e.g. Transparency as in the picture.
That is all in principle. Click OK and in the application, click Print and you print job is sent to the printer.
Double-sided
You can print double-sided when using the bypass tray. Once again, go to Printer Properties and Finishing tabs.
Select 2-sided Printing and the desired direction underneath it. In the picture below book binding is selected.
Erikoispaperit & kalvot ja ohisyötön käyttö