Table of Contents
If needed, one can print onto special papers and transparencies. Special papers could be used for certain print jobs ex final thesis etc.
In order to accomplish this, certain settings have to be set before printing.
Paper type by the weight of the paper
Paper types that are supported by Toshiba multifunction printers.
Paper type | Weight g/m3 |
|---|---|
Plain | 64-105 |
Thick1 | 106-163 |
Thick2 | 164-209 |
Thick3 | 210-256 |
Thick4 | 257-300 |
Using bypass tray
1. Depending Depending on the program that is being used, either select Printer Properties or Preferences.
Select Bypass Tray from the Paper Source drop-down menu.
2. Select Paper Source tab. From "Select by" choose Paper Source and from "Paper Source" select Multi-purpose Tray. Press OK.
3. Print the document.
4. Open Open Bypass tray from the device and set put papers or transparencies onto to it.in. (Printing side downwards)
5. Align paper controllers so that they are touching papers or transparencies. Note! Only use transparencies that are suited for printing with laser printers!
Select the paper type that used from the Paper Type drop-down menu. Or transparencies if those are used.
6. Choose paper size and type from multifunction device .(Näkymä riippuu laitteesta.) Choose paper size and from Change button and choose paper thickness depending on paper type. Select Transparency as Paper Type when printing on transparencies.
7. Finally press OK Finally press ok and print out the job normally.
Note! A3 transparencies >> When device is waiting for paper from the bypass tray, select Normal. This is because the device does not know that A3 transparencies exist.
Double sided
If needed, one can print double-sided jobs from the bypass tray also.
Select Printer properties and switch to Finishing
Select print layout from the 2-sided Printing section. Normal book layout is selected in the picture below.
In Metropolia default printing setting is 2-sided printing. Check that your settings are in order.
1. Depending on the program that is being used, either select Printer Properties or Preferences.
2. In Basic Settings tab you will find 1-sided/2-sided/Booklet Printing: where you can choose 1-sided, 2-sided, Booklet Printing. Press OK.