Projektin esittely - Project Summary
Description of ultrasonic conveyor
The project will be built in the ultrasonic actuator control. Control can be achieved, for example, Arduino. The actuator can be used, for example, conveyors or dirt.
More help can be found for example here
http://www.ndt.net/article/ultragarsas/58-2006-vol.1_06-l.svilainis.pdf
optional components
Actuators: http://www.alibaba.com/product-gs/474592536/15KHz_200KHz_ultrasonic_transducer.html
or http://www.alibaba.com/product-gs/526469862/ZKU_4538D_40H_Ultrasonic_transducer_Piezo.html
or http://www.alibaba.com/product-gs/526469839/ZKU_4535D_40H_50w_ultrasonic_transducer.html?s=
All components below are not secured???
MOSFETS(2x): http://fi.farnell.com/international-rectifier/irf640npbf/mosfet-n-200v-18a-to-220/dp/8648379 or
http://fi.farnell.com/international-rectifier/irf640nspbf/mosfet-n-200v-18a-d2-pak/dp/8648387
Condensators (0.1UF tantal condensator):
http://fi.farnell.com/multicomp/cb1h104m2acb/capacitor-0-1uf-50v/dp/1870000 or
http://fi.farnell.com/multicomp/cb1v104m2acb/capacitor-0-1uf-35v/dp/9708480
Diode (MUR120): http://fi.farnell.com/on-semiconductor/mur120g/diode-rectifier-200v-1a-do-41/dp/2101821 or
http://fi.farnell.com/on-semiconductor/mur120g/fast-recovery-diode-1a-200v-axial/dp/1126214
Bootstrap-circuit needs two condensator:
1) 0,22 mikroF ceramic condensator: http://fi.farnell.com/avx/0603yd224kat2a/cap-ceramic-x5r-220nf-16v-0603/dp/1740639RL
2) 1,5UF mikroF elecrolytic condensator: http://fi.farnell.com/rubycon/16st155ma23216/capacitor-1-5uf-16v-3216-20/dp/1688436
Halv bridge driver (IRS2004): http://fi.farnell.com/international-rectifier/irs2004pbf/ic-half-bridge-driver-8pdip/dp/1603671 (for 8-foot PDIP package PDIP )