Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

If a version upgrade is available to your computer, it is shown in Software Center, on the Available tab, e.g. Operating Systems. The current available update is:

Windows 10 1809 21H2 UPGRADE GUI

Notice: You may have to refresh Software Center by pressing F5, to see the upgrade.

Does the computer have BIOS Mode Legacy or UEFI? Is Secure Boot on?

1. In Start menu, enter System Information 
2. Make sure that BIOS Mode is UEFI and that Secure Boot State is On.  Most computers purchased within the last three years have these settings. 

Image Removed

3. If BIOS Mode is Legacy, contact Helpdesk. Do not try to install the upgrade yourself.

Upgrade checklist


1. Make sure that there is enough free disk space in the C drive. About 50GB is enough. Microsoft's recommended minimum is 32GB.
2. Make backup copies of your files before the upgrade, to be on the safe side.
3. Restart the computer.
4. Make sure that the computer is connected to a docking station or to Metropolia wired network. Running an upgrade while in WiFi network is not recommended. In addition, upgrade does not succeed while working remotely.
5. Make sure that you are not connected to VPN in Cisco AnyConnectissa.
6. Connect the power adapter to the computer, if the computer is not connected to a docking station or if the compter does not charge the battery in the docking station. 
7. Open Software Center and select Operating Systems tab:
   
8. If an upgrade is available on the tab, select it and install. The upgrade process takes 1-2 hours. 
9. When the upgrade is done, the computer goes back to the login screen. The OS version should show the new version in the background picture.
   

10. Log in to the computer and make sure that everything works.

Version check

The command vinwer winver tells what version of Windows 20 is installed.
In the picture below, Windows 10 versio 1909:

...


Did you encounter a problem

...

?

Restart the computer or device with the problem.
If restarting does not help, make a service request to Helpdesk at https://hdmetropolia.fi or send email to  helpdesk at metropolia.fi

...